Diamond Sea Dogs Leather Guitar Strap

Diamond Sea Dogs Leather Guitar Strap


Ask a question

Diamond Sea Dogs leather guitar strap is name plays off a great artist & colors of Seattle championship teams.

Smooth dark brown elk hide has a pattern of hand punched diamonds, which are filled with Italian halographic finish lambskins in sea foam green and dark blue, and outlined with teal color thread.

Very soft suede is wrapped around some foam and is glued to the inside and edge stitched, with approximately 1/8" rolled edge extending beyond the elk. This provides extremely comfortable strap and will resist sliding out of place when worn.

The adjustment strap is the same elk hide as the main strap.

The main strap is hand cut to 2 1/2" wide and tapers slightly at either end, and is about 42" long. I have softened the cut edges with a small beveler, so there is a gentle transition from the top surface to the edge.

Eleven adjustment slots are cut about every 1", and the 1" wide adjustment strap loops through the chosen slot and is woven through the other slots to provide the desired length and fixes to the back pin on the guitar.

I cut the adjustment strap to about 22", so the overall length can be adjusted from about 48" to 60" between the peg holes. But since I cut these myself, I can easily modify the length or spacing to get the fit that works for you. This leather is just over 0.08" (2mm) thick, and will settle in with use, like all good leather does, but it will not stretch out with use!

The holes for the front peg is punched at 5/16", and rear tab is 3/8". Each end has a small slit that ends with a small hole for a "keyhole" effect to prevent tears and to make the strap easy to install & remove. The hole and can accommodate most pegs, but remains securely in place. If you have a specific peg size you need to fit, please let me know.

I have also stitched around the front peg hole to ensure the layers don't separate with repeated install/removal from the peg. There is also a strap just above the front peg hand embossed with my "o:WILBUR" line logo, and the space may be suitable for storing an extra pick.

The design means the strap is only leather, and there is no metal or plastic hardware that could annoy you while you're playing, or your knock into you instrument while it's being moved or stored.

I can also provide coordinating leather "laces" if you prefer to tie the strap to the neck of the guitar, rather than using a front peg. There is no extra charge for these when you order the strap, but please note in the order you want it included.

If you have any questions, please convo me!