This all leather guitar strap is made with a bright foil printed cowhide in bands of colors from the rainbow and suited to show off your Pride or just for the joy of colors! The foil print is on thin red suede cowhide. The holes will be punched on order to suit your guitar!
NOTE: I will update a picture to show the smaller scale rainbow--color bands are about 1/2 the width of this one shown--I will get photo updated to show that, but all other details are exactly the same.
This is glued and sewn to an orange-red thick cowhide, which is smooth top grain, and very supple. But it is not thru-dyed, so on the edges it'll show white in its center, and is more orange on the flesh underside.
The main strap is 2.5" wide, tapering down to about 1 3/4" in the last 5 inches at the front peg hole, and less of a taper to about 2.25" on the slot end. The rainbow leather ends just above the first slot in a gentle curve.
The overall length of this strap as shown is adjustable from about 48" to 58". The main strap is about 42" long, and the 11 slots are spaced from about 29" to 40" from the front peg hole. The adjustment strap is 18" from slot to its rear peg hole when installed. (I refer to the front peg hole being on the main strap, and the rear is the adjustment slot). Please message me if you're interested in another length or width!
The 1" wide adjustment strap loops through the chosen slot and is woven through the other slots to provide the desired length and fixes to the back pin on the guitar. And I've laser etched my logo above where the peg hole will be. The edges of the base leather are trimmed with a small radius bevel tool to soften the look.
The holes will be punched on order per your preference for strap button size or strap locks!
Otherwise, I'll use my standard sizing of the holes at 5/16" in the front, and 3/8" in the back, and a small slit ends with a small hole at the top of the slit to prevent tears & the "keyhole" effect makes the strap easier to install & remove, and can accommodate most pegs (strap locks will not need the "key hole" feature). The firm leather and stitching around the front peg hole keeps strap to remain secured once it's fitted fully in place.
This design means the strap is only leather, and there is no metal or plastic hardware that could annoy you while you're playing, or your knock into you instrument while it's being moved or stored.
I can also provide leather "laces" if you prefer to tie the strap to the neck of the guitar, rather than using a front peg. And if you have a specific peg size you need to fit, please let me know. There is no extra charge for sizing the peg holes or for the ties when you order the strap, but please note in the order if you want any of those changes.
If you have any questions, please convo me!